APG PT-405 Explosion Proof Heavy Duty Pressure Transducer

Description Designed for use in harsh environments and hazardous locations With cCSAus certifications, the PT-405 pressure transducer provides great accuracy and reliability across a wide range of pressures. It offers a 4-20 mA output, absolute pressure, sealed gauge pressure, 316L stainless steel sensor body, IP65 rating, and single seal construction for maximum safety. PT-405 is resistant to harsh situations. The PT-405 pressure transducer is sensitive enough to provide precise pressure readings across its 30,000 psi range, with a standard accuracy of 0.25 percent BFSL and NIST certifications available for 0.5 percent, 0.25 percent, and 0.1 percent. A balance of toughness, dependability, and sensitivity. Features: ATEX Zone 0 / 2 Class I Division 1 / 2 -15 to 30,000 psi pressure ranges ±0.25% of full scale (BFSL) accuracy with linearity and hysteresis 17-4 / 316L: <±0.5% FS stability – one year zero drift 1.5x full-scale overpressure Up to 3x full scale or limit of process connection Burst pressure Less than 5ms frequency response Zero and Span adjustments Standard Outputs: 4-20 mA, 0-5 VDC, 0.5-4.5 VDC, 1-5 VDC, 0-10 VDC, RS-485 Single seal for highest safety protection factor 17-4 / 316L Stainless Steel, Incoloy enclosure 4-20 mA Output IP65 Specifications: Performance Accuracy (linearity & hysteresis):±0.25% of full scale (BFSL) Standard Pressure Ranges: -15 - 30,000 psi Stability - One Year Zero Drift:17-4 / 316L: <±0.5% FS Overpressure:1.5x full scale Burst Pressure:up to 3x full scale or limit of process connection Frequency Response:Less than 5ms Connectivity Output:4-20 mA (2 wire, loop-powered) 0-5, 0.5-4.5, 1-5, 0-10 VDC (non-isolated 3 wire) Modbus/RTU (RS-485) with temp. output Environmental Standard Compensated Temp.: ≤ 10 psi:0º - 60ºC / 32º - 140ºF 10 < x ≤ 1000 psi:-10º - 70ºC / 14º - 158ºF > 1000 psi:-17º - 54ºC / 0º - 130ºF Storage Temp:-40º - 82ºC / -40º - 180ºF Operating Temp:-40º - 85ºC / -40º - 185ºF Electrical Supply Voltage:4-20 mA, 0-5 / 0.5-4.5 / 1-5 VDC: 9-28 VDC 0-10 VDC: 12.5-28 VDC Modbus/RTU (RS-485): 9-28 VDC Electrical Connection:Pigtail with flying leads (4-foot minimum length) Electrical Protection:Protected against reverse polarity, surge per IEC 61000-4-5 Certification CSA/cCSAus Contract #237484 Ambient: -40º to 85º C Max. Working Pressure:30,000 psi Single Seal 4-20mA, 0-5/0.5-4.5/1-5 VDC, 0-10 VDC, RS-485/Modbus Explosion Proof: Class I, Div. 1, Groups C & D Physical Weight:0.9 - 1.5 lbs. (408 - 680 g) typical Wetted Materials:316L Stainless Steel ( ≤ 1,000 psi) 17-4 Stainless Steel ( > 1,000 psi) Incoloy ( > 10,000 psi) Incoloy conforms to NACE MR-01-75 and ISO 1516-3 Certifications: CSA Certificate of Compliance Resources: Datasheet Install Guide User Manual